Talk like a cute little boy with VCSD8.0

Click here to download the cute little boy's voice.

This voice will serve as the target voice to which your voice will be modulated by Voice Changer Software Diamond 8.0, we'll refer to it as the sample voice.

On main form, click on Voice Comparator icon (1) to open Voice Comparator window.

In the Voice section:

-  Click the Add button (2) to open the Voice Import dialog box.

- Click on the Browse button (3) and choose the female voice file you have just downloaded above.

- In the Person textbox (4), type in a name for the female voice as “Cute boy”.

- Type what she says in the file into the Phrase field (5): “Play game”.

- Click the Import button (6) to save and close the Import panel.

The sample voice which was just imported is displayed in the Voice section (7).

In the Voice section:

- Click Play (8) to re-listen the simple voice.

In the Morpher section.

- Click Rec (9) to start recording your voice. Try to mimic the sample voice over its tone, speed, rhythm and volume.

Note: If you receive an error message saying that "Cannot make comparison. Please, try to record your voice again," it might because you spoke too low or too fast that VCS Comparator couldn't detect the voice. Close the message and record your voice again.

- You can click on the Play (10) button to re-listen to your newly recorded voice.

- Click on the Auto button (11)  VCS Comparator will automatically compare the two voices and then suggest the best settings in Pitch, Timbre & Advanced Tune that make your voice sound like to the sample female voice most.

- Click OK (12) to close the Voice Comparator window and return to the main panel. The suggested settings will be applied to the Voice Morpher module.

- Speak to the microphone to check if the result voice is what you want or not. If you are satisfied with it, you are ready for step 6.

If you are not, try adjusting slightly the pitch and timbre to see if you can get a better result. If you are still not pleased, go to the next step.

In the Equalizer module at the bottom of main panel:

- Click Preset >> select Gentle.

Tip: In most cases, the Gentle preset works well. But if it does not, try the other ones or load your own settings. You can click the Reset command to discard the changes made by the preset.

If you feel that the output voice has background noise, follow this step to eliminate them. But firstly, you are recommended to save your current morphing settings, click the Save button on the Voice Morpher module on the main panel to save them. The saved file will keep all the settings that are being applied in VCS.

- Click Sound Quality icon on the Menu bar to open Sound Quality form.

- Turn on Limiter(1) and Noise Reduction sections (2)  and set value until the noise is less dominant.