Customer Login
Forgot your Account?

VCS Recorder - Save audio file in WAV format

(4.7 out of 5 based on 86 votes)
User Rating: / 86PoorBest 

INTRODUCE

The new version of AV Voice Changer Software Goldhas a Virtual Audio Driver (AVnex Virtual Audio Device) which works as a virtual audio & sound device. This device can be used with any VoIP application and Instant messengers for changing voice and/or recording in real-time. By setting AVnex Virtual Audio Device as the active audio driver for the microphone in those applications, you will be able to control your voice tone and speak the way you want.

STEPS TO TAKE

Click on the steps below to startExpand all | Collapse all
STEP 1: Change settings on the stereo or mono audio streams

On the main panel, move the cursor (1) of the Stereo / Mono scale either left or right to instruct how your records will be.

In this illustration, the position of (1) shows that the file will be saved in Stereo type with 44100 bits. (read a tip on this).

Note: Only when the DUPLEX mode is ON (2) that you can make change to the Stereo/Mono scale. If the DUPLEX mode is off, it is because there is a playback audio stream(s) in your computer, please turn off any media player or any application that is producing audio stream at that time.

Then, click on the Recorder button (3) on the main panel to open Voice Changer Software Recorder.

 

STEP 2: Change encoder settings of the Recorder

- Check the option Record non-morphed streams at VCS (1) to set VCS Recorder to record audio streams out of VCS's morphing effects.

- Click the Settings menu (2) to enter the settings window. Click the Encoders tab (3) to switch to this tab.

On the Encoders tab.

1. Check the Advanced mode checkbox (4) to show the full list of audio rates supported by VCS Recorder.

2. The .wav file format is represent by the 44100, Mono or 41100, Stereo (5).

STEP 3: Choose the file type of the output file

After double-clicking on the 44100, Mono, a big list will pop up:

- Choose Microsoft PCM Converter (6).

- A small list will expand, select Sampling Rate: 44100HZ (7).

- On the next list, select 44100 KHz, 16 Bit, Mono, 705.6Kbits/sec (8).

- Click OK to apply the settings and close the Settings dialog box.

All recorded files should now be saved in WAV format.

 

 

» Definition:
WAV is an audio file format which represent the WAVE file for storing digital audio (waveform) data. It supports a variety of bit resolutions, sample rates, and channels of audio. This format is very popular with IBM PC (clone) platforms, and is widely used in professional programs that process digital audio waveforms.