Voice Changer Software Gold - Turn your voice into a charming lady's voice

On the main panel, click on the Comparator button to open VCSG Comparator.

In the Voice section:

- Click the Add button (2) to open the Voice Import panel.
- Click on the Browse button (3) and point to the female voice file you have just downloaded above.
- In the Person box (4), type in a name for the female voice as "Charming lady".
- Type what she says in the file into the Phrase field (5): "I'm really looking forward to getting to know you better".
- Click the Import button (6) to save and close the Import panel.

In the Record section:

- The sample voice which was just imported is displayed in the Voice section (6).

- To re-listen to the sample voice, click the Play (7) button.

- In the Morpher section, click the Rec (1) button to to start recording your voice. Try to mimic the sample voice over its tone, speed, rhythm and volume.

Note: If you receive an error message saying that "Cannot make comparison. Please, try to record your voice again," it might because you spoke too low or too fast that VCS Comparator couldn't detect the voice. Close the message and record your voice again.

You can click on the Play (2) button to re-listen to your newly recorded voice.

- The Comparator message (3) is now showing how similar your voice and the sample voice are.

Tip: You can adjust the Timbre, Pitch and Adv. Tune sliders (Advanced tune) to make your recorded voice sound more alike to the sample voice yourself, then click the Compare (4) button to get the comparison result. However, it is recommended that you leave the settings alone and keep following the next step.

- Click the Auto button (5) (see fig 4), VCS Comparator will automatically compare the two voices and then suggest the best settings in Pitch, Timbre & Adv. Tune that make your voice sound most alike to the sample female voice.

- Click OK to close the Comparator and return to the main panel. The suggested settings will be applied to the Voice Morpher module.

- Speak to the microphone to check if the result voice is what you want or not. If you are satisfied with it, you've done.

If you are not, try adjusting slightly the pitch and timbre to see if you can get a better result. If you are still not pleased, go to step 5.

- Click the Advanced button to expand the Advanced panel.

- Select the Equalizer tab, turn it ON (1), click on the Preset button (2) and select Gentle.

Tip: In most cases, the Gentle preset works well. But if it does not, try the other ones or load your own settings. You can click the Reset command to discard the changes made by the preset.